report:sus

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
report:sus [2026/04/30 01:07] – team1report:sus [2026/05/17 20:48] (current) – [5.5 Life Cycle Assessment] team1
Line 1: Line 1:
 ===== 5. Eco-efficiency Measures for Sustainability ===== ===== 5. Eco-efficiency Measures for Sustainability =====
 +
 /* /*
 //Sustainability is a widely used concept that is applied by companies, organizations and politicians in various contexts. //Sustainability is a widely used concept that is applied by companies, organizations and politicians in various contexts.
Line 6: Line 7:
 */ */
  
-==== 5.1 Introduction ==== 
 Eco-efficiency is a strategic management concept that focuses on the delivery of competitively priced goods while progressively reducing ecological impacts and resource intensity throughout the life cycle. For the Screen2Green project, this principle serves as a foundational design constraint. This chapter outlines the strategies implemented to ensure the Smart Pot is a sustainable solution, focusing on global goals, optimized resource management such as optimal use of water and the use of local portuguese biodegradable materials. Eco-efficiency is a strategic management concept that focuses on the delivery of competitively priced goods while progressively reducing ecological impacts and resource intensity throughout the life cycle. For the Screen2Green project, this principle serves as a foundational design constraint. This chapter outlines the strategies implemented to ensure the Smart Pot is a sustainable solution, focusing on global goals, optimized resource management such as optimal use of water and the use of local portuguese biodegradable materials.
  
-=== 5.1.1 European Union Sustainable Development Goals ===+ 
 +==== 5.1 European Union Sustainable Development Goals ==== 
 Sustainable engineering aims to address modern challenges by balancing environmental protection with economic viability and social well-being. This project is grounded in the three pillars of sustainability: environmental responsibility, economic performance, and social equity. This idea is aligned with the 17 Sustainable Development Goals (SDGs) established by the United Nations, which provide a global framework for coordinated climate action [(UN2015)]. Addressing climate change requires not only large-scale systemic transformations but also many small improvements, innovative technologies, and incremental design decisions that collectively reduce environmental impacts and support more resilient consumption patterns. The Screen2Green project goals can be seen in Table {{ref>SDG}}. Sustainable engineering aims to address modern challenges by balancing environmental protection with economic viability and social well-being. This project is grounded in the three pillars of sustainability: environmental responsibility, economic performance, and social equity. This idea is aligned with the 17 Sustainable Development Goals (SDGs) established by the United Nations, which provide a global framework for coordinated climate action [(UN2015)]. Addressing climate change requires not only large-scale systemic transformations but also many small improvements, innovative technologies, and incremental design decisions that collectively reduce environmental impacts and support more resilient consumption patterns. The Screen2Green project goals can be seen in Table {{ref>SDG}}.
  
Line 20: Line 22:
 |Goal 13: Climate Action|By selecting carbon-negative materials, such as Portuguese cork Project aims to contributes to the reduction of the greenhouse gas emissions associated with the product's life cycle| |Goal 13: Climate Action|By selecting carbon-negative materials, such as Portuguese cork Project aims to contributes to the reduction of the greenhouse gas emissions associated with the product's life cycle|
 </table> </table>
 +
  
 ==== 5.2 Environmental  ==== ==== 5.2 Environmental  ====
 +
 /* /*
 //The environmental influence of products is of high importance in many aspects such as by depleting natural resources or emitting greenhouse gases. //The environmental influence of products is of high importance in many aspects such as by depleting natural resources or emitting greenhouse gases.
 Concerning the product, it is important to try to reduce negative influences on the environment. This is achieved by reducing, reusing and recycling raw materials; taking into consideration the energy consumption in all phases of the project, as well as by minimizing transport.// Concerning the product, it is important to try to reduce negative influences on the environment. This is achieved by reducing, reusing and recycling raw materials; taking into consideration the energy consumption in all phases of the project, as well as by minimizing transport.//
 */ */
 +
 The environmental assessment of the Smart Pot is divided into two distinct categories: the physical product itself and the operational phase involving the user. The environmental assessment of the Smart Pot is divided into two distinct categories: the physical product itself and the operational phase involving the user.
 +
  
 === 5.2.1 Product Impact === === 5.2.1 Product Impact ===
  
-The physical construction of the Smart Pot is designed to meet strict European standards. To minimize hazard waste, all electronic components must comply with the RoHS Directive, which restricts the use of toxic substances like lead and mercury [(RoHS2011)], all components will be purchased from local Portuguese retailers. Furthermore, the design adheres to the WEEE Directive, prioritizing a modular assembly that allows for easy disassembly. This ensures that the electronics can be separated from the  casing at the end of its life, facilitating efficient recycling [(WEEE2012)].+The physical construction of the Smart Pot is designed to meet strict European standards. To minimize hazard waste, all electronic components must comply with the RoHS Directive, which restricts the use of toxic substances like lead and mercury [(RoHS2011)], all components will be purchased from local Portuguese retailers. Furthermore, the design adheres to the Waste Electrical and Electronic Equipment (WEEE) Directive, prioritizing a modular assembly that allows for easy disassembly. This ensures that the electronics can be separated from the  casing at the end of its life, facilitating efficient recycling [(WEEE2012)]. 
  
 === 5.2.2 User Impact (Water Consumption Optimization) === === 5.2.2 User Impact (Water Consumption Optimization) ===
Line 37: Line 44:
  
 The Screen2Green Smart Pot solves this problem by utilizing an automated watering system (using solenoid valve connected to ESP32 board) specifically calibrated for the life cycle of Basil. Basil requires regular irrigation to maintain constant growth but is highly susceptible to fungal diseases if the foliage or soil remains overly saturated [(NDABasil2024)]. By employing moisture sensors, the system provides the exact amount of water needed at the correct intervals. This precision optimizes water consumption and ensures the plant's survival, reducing the environmental waste associated with frequently replacing dead plants. The Screen2Green Smart Pot solves this problem by utilizing an automated watering system (using solenoid valve connected to ESP32 board) specifically calibrated for the life cycle of Basil. Basil requires regular irrigation to maintain constant growth but is highly susceptible to fungal diseases if the foliage or soil remains overly saturated [(NDABasil2024)]. By employing moisture sensors, the system provides the exact amount of water needed at the correct intervals. This precision optimizes water consumption and ensures the plant's survival, reducing the environmental waste associated with frequently replacing dead plants.
 +
  
 === 5.2.3 Energy === === 5.2.3 Energy ===
  
 The energy strategy for the Screen2Green project focuses on minimizing electrical waste through a streamlined power distribution network and the elimination of high-consumption mechanical actuators. By prioritizing local procurement from Mauser Portugal, the system ensures high-quality components with verified technical specifications tailored for the 2026 market [(Mauser2026)]. The energy strategy for the Screen2Green project focuses on minimizing electrical waste through a streamlined power distribution network and the elimination of high-consumption mechanical actuators. By prioritizing local procurement from Mauser Portugal, the system ensures high-quality components with verified technical specifications tailored for the 2026 market [(Mauser2026)].
 +
  
 == 5.2.3.1 System Power Architecture == == 5.2.3.1 System Power Architecture ==
Line 47: Line 56:
  
 The ESP32 serves as the central control unit, managing the power distribution to the sensors. While the ESP32 has a peak consumption of 1.2 W during Wi-Fi transmission, the system is designed to operate primarily in "Deep Sleep" mode. In this state, only the temperature and soil moisture sensors remain active at milliwatt levels, ensuring that the total daily energy footprint remains minimal [(spressif2024)]. The ESP32 serves as the central control unit, managing the power distribution to the sensors. While the ESP32 has a peak consumption of 1.2 W during Wi-Fi transmission, the system is designed to operate primarily in "Deep Sleep" mode. In this state, only the temperature and soil moisture sensors remain active at milliwatt levels, ensuring that the total daily energy footprint remains minimal [(spressif2024)].
 +
  
 == 5.2.3.2 Gravity-Fed Irrigation Efficiency == == 5.2.3.2 Gravity-Fed Irrigation Efficiency ==
Line 53: Line 63:
  
 The solenoid valve is integrated at the lowest point of this reservoir. Energy is only consumed during the short intervals when the relay activates the valve to release water. By utilizing gravity rather than mechanical pumping, the system reduces its peak power requirements by approximately 70 % compared to pump-based alternatives [(Ferreira2015)]. The solenoid valve is integrated at the lowest point of this reservoir. Energy is only consumed during the short intervals when the relay activates the valve to release water. By utilizing gravity rather than mechanical pumping, the system reduces its peak power requirements by approximately 70 % compared to pump-based alternatives [(Ferreira2015)].
 +
  
 === 5.2.4 Materials === === 5.2.4 Materials ===
  
 The material strategy for the Smart Pot combines a traditional Portuguese resource with modern manufacturing techniques to minimize the carbon footprint. The material strategy for the Smart Pot combines a traditional Portuguese resource with modern manufacturing techniques to minimize the carbon footprint.
 +
  
 == 5.2.4.1 Cork Materials Research ==  == 5.2.4.1 Cork Materials Research == 
Line 63: Line 75:
  
 Cork is effectively recyclable because its processing generates by-products such as granules and powder that are consistently reused to manufacture agglomerates and composite materials. This practice supports a near-zero-waste lifecycle, where almost all cork material is reintegrated into new products rather than discarded [(Pereira)]. Cork is effectively recyclable because its processing generates by-products such as granules and powder that are consistently reused to manufacture agglomerates and composite materials. This practice supports a near-zero-waste lifecycle, where almost all cork material is reintegrated into new products rather than discarded [(Pereira)].
 +
  
 == 5.2.4.2 3D Printing Filament Research == == 5.2.4.2 3D Printing Filament Research ==
Line 68: Line 81:
 Internal parts of the pot are made using 3D printing. The chosen material is Polylactic Acid (PLA), which is a biodegradable plastic made from renewable plants like corn instead of petroleum. Degradation rate is 1 week to 24 months, being the shortest out of all polymers listed. PLA is a sustainable choice because it can be recycled many times without losing its strength [(PLA)]. Internal parts of the pot are made using 3D printing. The chosen material is Polylactic Acid (PLA), which is a biodegradable plastic made from renewable plants like corn instead of petroleum. Degradation rate is 1 week to 24 months, being the shortest out of all polymers listed. PLA is a sustainable choice because it can be recycled many times without losing its strength [(PLA)].
  
-To further improve the sustainability of the printed components, the project explores the use of cork-infused filaments based on recent research. These materials combine polymers such as Acrylonitrile Styrene Acrylate (ASA) with cork powder derived from recycled cork waste, allowing natural content to be incorporated directly into 3D printed parts. Studies show that cork can be added in proportions of up to around 15 to 20 percent by weight before the material becomes too brittle for effective processing. This approach not only increases the renewable fraction of the product but also creates parts with a texture and appearance that better match cork-based elements of the design. At the same time, these composites can contribute to lightweight structures and offer some insulating properties, supporting both functional and environmental goals. By selecting recycled polymers together with cork composites, the 3D printed elements remain aligned with the eco-friendly objectives of the Screen2Green project while relying on experimentally validated material behavior [(cork_filament_2024)].+To further improve the sustainability of the printed components, the project explores the use of cork-infused filaments based on recent research. These materials combine polymers such as Acrylonitrile Styrene Acrylate with cork powder derived from recycled cork waste, allowing natural content to be incorporated directly into 3D printed parts. Studies show that cork can be added in proportions of up to around 15 to 20 % by weight before the material becomes too brittle for effective processing. This approach not only increases the renewable fraction of the product but also creates parts with a texture and appearance that better match cork-based elements of the design. At the same time, these composites can contribute to lightweight structures and offer some insulating properties, supporting both functional and environmental goals. By selecting recycled polymers together with cork composites, the 3D printed elements remain aligned with the eco-friendly objectives of the Screen2Green project while relying on experimentally validated material behavior [(cork_filament_2024)].
  
  
 ==== 5.3 Economical ==== ==== 5.3 Economical ====
 +
 /* /*
 //The economic aspect of sustainability relates to the efficient and cost-effective utilization of resources, aiming to minimize environmental impact while ensuring long-term economic viability. The goal is to strike a balance between environmental responsibility and financial success by devising products, processes, and business models that are both ecologically and economically advantageous. //The economic aspect of sustainability relates to the efficient and cost-effective utilization of resources, aiming to minimize environmental impact while ensuring long-term economic viability. The goal is to strike a balance between environmental responsibility and financial success by devising products, processes, and business models that are both ecologically and economically advantageous.
Line 79: Line 93:
  
 Economical aspect of sustainability in the Screen2Green smart pot focuses on balancing between economic growth of the company and long-term value provided for the user of the pot. Company aims to provide value both for itself ensuring growth, like throughout selling maintenance services for the pot, but still providing product with long life-span and high quality components like anti-corrosion sensors and locally provided cork. All materials selected for the pot aim to be repairable and replaceable. Economical aspect of sustainability in the Screen2Green smart pot focuses on balancing between economic growth of the company and long-term value provided for the user of the pot. Company aims to provide value both for itself ensuring growth, like throughout selling maintenance services for the pot, but still providing product with long life-span and high quality components like anti-corrosion sensors and locally provided cork. All materials selected for the pot aim to be repairable and replaceable.
 +
  
 ==== 5.4 Social ==== ==== 5.4 Social ====
 +
 /* /*
 //Social sustainability is about identifying and managing business impacts, both positive and negative, on people. It refers to the ability of a project or initiative to foster positive and inclusive social interactions while considering the long-term effects on society. //Social sustainability is about identifying and managing business impacts, both positive and negative, on people. It refers to the ability of a project or initiative to foster positive and inclusive social interactions while considering the long-term effects on society.
Line 92: Line 108:
  
 ==== 5.5 Life Cycle Assessment ==== ==== 5.5 Life Cycle Assessment ====
 +
 /* /*
 //One crucial task is to assess how each stage of the life cycle contributes to the overall environmental impact. This analysis is typically aimed at prioritizing enhancements in products or processes and comparing various products for internal purposes. //One crucial task is to assess how each stage of the life cycle contributes to the overall environmental impact. This analysis is typically aimed at prioritizing enhancements in products or processes and comparing various products for internal purposes.
Line 104: Line 121:
 <WRAP centeralign> <WRAP centeralign>
 <figure fig:LCA> <figure fig:LCA>
-{{ :report:licensed-image.jpeg?700 |{{:img |LCA}}+{{ :report:licensed-image.jpeg?700 |LCA}}
 <caption>LCA. Source: Generated using Gemini.</caption> <caption>LCA. Source: Generated using Gemini.</caption>
 </figure> </figure>
 </WRAP> </WRAP>
  
-Table {{ref>LCInventorytable}} estimates the mass and materials for a gravity-fed pot designed for a medium basil plant. The totals are calculated based on a structural weight of approximately 600 grams, plus the electronic components.+Table {{ref>LCInventorytable}} estimates the mass and materials for a gravity-fed pot designed for a medium basil plant. The totals are calculated based on a structural weight of approximately 600 g, plus the electronic components.
  
 <table LCInventorytable> <table LCInventorytable>
Line 121: Line 138:
 |Sensors and wiring|Electronics|40|Soil and temperature sensors| |Sensors and wiring|Electronics|40|Soil and temperature sensors|
 </table> </table>
 +
  
 === 5.5.1 Resources === === 5.5.1 Resources ===
Line 129: Line 147:
  
   * Sustainable Metals: The solenoid valve and ESP32 use copper and silicon. These are resource-intensive but durable, ensuring the product does not need frequent replacement.   * Sustainable Metals: The solenoid valve and ESP32 use copper and silicon. These are resource-intensive but durable, ensuring the product does not need frequent replacement.
 +
  
 === 5.5.2 Processing === === 5.5.2 Processing ===
Line 137: Line 156:
  
   * Filament Blending: Mixing granulated cork with PLA to create the 30 % cork filament. This reduces the total plastic volume by one third.   * Filament Blending: Mixing granulated cork with PLA to create the 30 % cork filament. This reduces the total plastic volume by one third.
 +
  
 === 5.5.3 Manufacturing === === 5.5.3 Manufacturing ===
Line 145: Line 165:
  
   * Toxic-Free Production: PLA and cork printing produce minimal fumes. No toxic chemical baths or heavy industrial melting points are required for the main structure.   * Toxic-Free Production: PLA and cork printing produce minimal fumes. No toxic chemical baths or heavy industrial melting points are required for the main structure.
 +
  
 === 5.5.4 Distribution === === 5.5.4 Distribution ===
Line 153: Line 174:
  
   * Eco-Packaging: We use recycled cardboard boxes with no plastic fillers. The natural cork base of the pot acts as its own shock absorber during transit.   * Eco-Packaging: We use recycled cardboard boxes with no plastic fillers. The natural cork base of the pot acts as its own shock absorber during transit.
 +
  
 === 5.5.5 Use === === 5.5.5 Use ===
Line 163: Line 185:
  
   * Smart Automation: The ESP32 and soil sensors manage the water tank efficiently. This ensures the plant thrives for 1.5 to 2 weeks without manual effort.   * Smart Automation: The ESP32 and soil sensors manage the water tank efficiently. This ensures the plant thrives for 1.5 to 2 weeks without manual effort.
 +
  
 == 5.5.5.2 Repair == == 5.5.5.2 Repair ==
Line 169: Line 192:
  
   * Structural Durability: PLA and cork are moisture-resistant. This prevents degradation over years of use, while modular electronics allow for easy tech upgrades.   * Structural Durability: PLA and cork are moisture-resistant. This prevents degradation over years of use, while modular electronics allow for easy tech upgrades.
 +
  
 === 5.5.6 End of Life === === 5.5.6 End of Life ===
Line 177: Line 201:
  
   * Circular Economy: Electronic components like the ESP32 and relay must be sent to WEEE collection points in Porto. This allows for the recovery of precious metals and responsible waste management.   * Circular Economy: Electronic components like the ESP32 and relay must be sent to WEEE collection points in Porto. This allows for the recovery of precious metals and responsible waste management.
 +
 +
 ==== 5.6 Summary ==== ==== 5.6 Summary ====
 +
 //Provide here the conclusions of this chapter and introduce the next chapter.// //Provide here the conclusions of this chapter and introduce the next chapter.//
  
Line 183: Line 210:
  
 A Life Cycle Analysis highlights the benefits of a localized production model in Porto, which significantly reduces transportation-related carbon emissions. The product maintains economic and social value by promoting digital well-being and offering a modular architecture. This structural design facilitates individual component repair and ensures responsible end-of-life management through industrial composting and specialized electronic waste recovery. A Life Cycle Analysis highlights the benefits of a localized production model in Porto, which significantly reduces transportation-related carbon emissions. The product maintains economic and social value by promoting digital well-being and offering a modular architecture. This structural design facilitates individual component repair and ensures responsible end-of-life management through industrial composting and specialized electronic waste recovery.
 +
 +
  • report/sus.1777507636.txt.gz
  • Last modified: 2026/04/30 01:07
  • by team1